14
Life Fitness Model 5500HR Treadmill
HOW TO...REMOVE AND REPLACE THE DISPLAY CONSOLE
Tools Required:
Phillips Screwdriver
Step 1
Turn the power OFF
at the ON/OFF switch and then unplug the unit from the electrical outlet.
Step 2
Using a Phillips screwdriver, remove the four SCREWS from the underside of the CONTROL PANEL which
secure the DISPLAY CONSOLE in place.
Step 3
Disconnect the 10-PIN CONNECTOR protruding from the top of the CONTROL PANEL from the corresponding
CONNECTOR in the back of the DISPLAY CONSOLE. Disconnect the 4-PIN CONNECTOR of the HEART RATE
wire harness into the corresponding CONNECTOR in the back of the DISPLAY CONSOLE.
Step 4
Replace the DISPLAY CONSOLE by reversing Steps 1 and 2. When installing the four SCREWS to
secure the DISPLAY CONSOLE to the CONTROL PANEL, tighten the SCREWS in a criss-cross
pattern to avoid possible overtightening and causing possible damage to the DISPLAY CONSOLE
BRACKET or HOUSING.
NOTE: DO NOT OVERTIGHTEN THE SCREWS TO AVOID DAMAGE TO THE
DISPLAY CONSOLE BRACKET OR HOUSING.
1 3
X
4 2
Summary of Contents for Lifecycle 5500HR
