Life Fitness Lifecycle 5500HR, Service Manual, Page: 16 / 47

2
Life Fitness Model 5500HR Treadmill
DIAGNOSTIC TESTS ( Continued )
The SPEED DOWN KEY is used for the following testing information :
⇒
CHECK THE DISPLAY/KEYPAD FUNCTIONS
⇒
REVIEW STATISTICS
⇒
IDENTIFY SOFTWARE VERSION
Start with the Life Fitness model 5500HR treadmill turned OFF at the I/O switch.
To advance through this test, use the ENTER KEY .
Power up the unit while holding the SPEED DOWN KEY
∇
. All LED’s on the Display Console will light.
Press ENTER onc e , and Console should begin to scroll through lighting LED’s individually.
Press ENTER a second time and this will bring you to the Keypad test. By pressing each key, a pattern
of LED’s will light. This shows that the button is responding.
Press ENTER a third time and the word Stats will appear in the display readout. Pressing the SPEED UP
∆
KEY
will scroll you through the individual statistics. (To scroll back through the statistics, press the SPEED DOWN
∇
KEY )
1st Press Distance LED Lit: Miles
2nd Press Time LED Lit: Motor ON Time (hours)
3rd Press Incline LED Lit: Lift Motor run time
4th Press Cal/Hr LED Lit: Lift Motor (percentage of elevation usage)
5th Press Speed LED Lit: Current limiter Activation
Press ENTER a fourth time and this will give you the Software Version on the treadmill.
For example, the Display will read 2.7EE1 .
2.7 Software Version
E English Measurement (miles)
“
M “ would designate Metric Measurement (kilometers)
E English Language
1 120V
Press ENTER a fifth time and “ Units ” appears in the Display readout. Pressing the SPEED UP
∆
KEY enables
you to change the unit of measure from ENGLISH/ENGLISH to ENGLISH/METRIC. Pressing the SPEED DOWN
KEY
∇
enables you to change the unit from ENGLISH/METRIC to ENGLISH/ENGLISH. Press the CLEAR key 1
time to verify the default after you have chosen a setting.
Press ENTER a Sixth time and “ Lang ” appears in the Display readout. Pressing the SPEED UP
∆
KEY enables
you to change from English to a Foreign language.
At any time in this Test Mode you can go back to the start by pressing the CLEAR/PAUSE KEY .
(Continued)