Life Fitness Lifecycle 5500HR, Service Manual, Page: 29 / 47

11
Life Fitness Model 5500HR Treadmill
HOW TO...REMOVE AND REPLACE THE STRIDING BELT
Tools Required: Phillips screwdriver, hex key wrench set, socket set, open end wrench (1/2”)
ATTENTION: THE DECK MUST ALWAYS BE REPLACED WHEN INSTALLING A NEW STRIDING BELT.
Step 1
Turn the power OFF at the
ON/OFF switch and then
unplug the unit from the
electrical outlet.
Step 2
Remove the MOTOR
COVER (See “How To...”).
Step 3
Remove the REAR ROLLER
(See “How To...”).
Step 4
Remove the DECK
(See “How To...”).
Step 5
Using an open end wrench
(1/2”), loosen the user left
side of the FRONT ROLLER
ASSEMBLY
.
Step 6
Carefully lift the user-left
side of the FRONT ROLLER
ASSEMBLY and slide the
STRIDING BELT from the
FRONT ROLLER.
Step7
Reposition the new STRIDING BELT around the FRONT ROLLER ASSEMBLY . Reverse steps 1 through 5 to
return all parts to their proper positions.
Step 8
Refer to “How To...ADJUST AND TENSION THE STRIDING BELT” for proper belt tensioning instructions.