4.
Align seat assembly with the front and rear seat linkage assemblies. Slide pivot shaft through the seat assembly
and rear seat linkage assembly.
5.
Install screws and washers securing the seat assembly to the front seat linkage assembly using an 8mm Allen
wrench.
Item
Description
Qty.
1
Seat Assembly
1
2
Front Seat Linkage Assembly
1
3
Rear Seat Linkage Assembly
1
4
Pivot Shaft
1
5
Washer, Flat 3/8"
2
6
Screw, M10 x 1.5, 30mm
2
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Install Seat Back Assembly
1.
Install screws and washers securing the seat back linkage assembly to the main frame assembly using an 8mm
Allen wrench.
Item
Description
Qty.
1
Seat Back Linkage Assembly
1
2
Main Frame Assembly
1
3
Washer, Flat 3/8"
2
4
Screw, M10 x 1.5, 30mm
2
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
2.
Pull detent pin out on the rear seat linkage assembly and slide the seat back assembly down into position.
3.
Install screws and washers securing the seat back assembly to the seat back linkage assembly and seat assembly
using an 8mm Allen wrench.
Item
Description
Qty.
1
Seat Back Assembly
1
2
Seat Back Linkage Assembly
1
3
Seat Assembly
1
4
Washer, Flat 3/8"
4
5
Screw, M10 x 1.5, 30mm
4
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
Page 24 of 35
