11.
NOTE:
OPTIONAL:
If your product does not include front shrouds, skip this step.
Install screws and shroud retainer grommets into the side tubes of the tower frame using a Phillips screwdriver.
Item
Description
Qty.
1
Grommet, Shroud Retainer
6
2
Screw, M4.2 x 0.7, Phillips
6
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
12.
Install shroud retainers into holes in the side tubes of the tower frame. Discard shroud retainers if your product
includes front shrouds.
Item
Description
Qty.
1
Shroud Retainer
6
13.
Slide weight stack cushions onto the guide rods.
Page 17 of 35
