Lifan Energy Storm PD20REG-DB, Owner'S Manual

Page: 23 / 42

Lifan Power USA. 2250 Industrial Park Rd. Van Buren, AR 72956
PH 866-471-7464 www.lifanpowerusa.com
22
Checklist
：
● Check for fluid and coolant leaks
● Inspect inside and out of the radiator to ensure no excessive dirt is present.
● Check the radiator coils and ensure no dust, dirt or foreign debris exists.
● Check hoses to ensure it is not blocked.
Add additional coolant to recommended levels.
9. Fault indicator lamp
When red lamp indicator is illuminated, operator must shut the generator down
and follow trouble shooting guide and steps .
If the generator still won’t start, press the emergency stop switch. Rotate clockwise
to pop up position. After waiting for 30 seconds, try starting again. If generator still cannot
be started, check the generator carefully for loose wires, battery terminals and voltage
output, gas flow to the lines and generator.
If after restarting the generator, the fault indicator light is still red, the generator will
automatically shut down. Retrace steps in trouble shooting guide and procedures again.
After correcting the fault, the generator is able to be re-started. If the fault indicator light
remains off, then the generator is operating normally. If not contact your local service
provider or contact us by calling 866-471-7464
It is important to confirm after starting that the normal electrical output range is not
exceeded as this will damage the generator.
10. Exhaust color.
As long as the generator engine is running within the rated output range,
a)
The exhaust will be colorless.
b) If the exhaust is dark grey or black after running for 60 seconds or more, this is an
indication of an engine problem. Shut the engine down and contact your local service
provider or contact us at 866-471-7464.
11. Other problems requiring shutting down of the generator
You should shut down the engine if the following circumstances happen.

The engine speed is hunting ( inconsistently speeding up and down)

An abnormal noise is heard coming from the generator or engine.

The engine exhaust suddenly turns dark grey or black.

The fault indicating light is illuminated.