Lifan Power USA. 2250 Industrial Park Rd. Van Buren, AR 72956
PH 866-471-7464 www.lifanpowerusa.com
17
1.
Engine Oil
. The unit is not shipped with oil from factory!!! Use high-quality detergent
oil “Classified for Service in CC, SD, SE, or SF use” Only use oil having the following
SAE viscosity ratings. Fill with the recommended amount of oil as specified. Overfilling or
under filling can cause damage to the engine. Use the following recommended or similar
type engine oil.
● Place funnel in engine oil inlet.
●First time operation will require 4 liters or (4.25qts) of oil
● Check oil gauge dipstick regularly, oil level should be kept between top and
bottom lines, at all times. It is preferred to be at the top mark but not over.
2.
Cooling System
Use only automotive grade antifreeze and distilled water in cooling system.
Do not use water that contains salt or alkalis (Tap Water)! Using non-distilled water
creates scale in the radiator causing corrosion and premature wear.
You must check and maintain all fuel, lubricant and coolant levels. Not doing so will
accelerate and shorten the life of the standby system. Attention must be paid to all fluid
systems and annually serviced buy an authorized service provider or call (866)-471-7464 for
assistance.
Temperature
Recommended Oil grade
Below 32° F (0° C)
SAE 10W or 15W-40
32° to 80° F (-1° to 27° C)
SAE 20W or 15W-40
Above 80° F (27° C)
SAE 30W or 15W-40
Summary of Contents for Energy Storm PD20REG-DB
Page 1: ......
