background image

27

LIMITED WARRANTY

Liebert Corporation extends the following LIMITED WARRANTY to the

purchaser and to its customer (collectively referred to as the "Purchaser"): the

enclosed Uninterruptible Power System (UPS) and components are free from

defects in materials and workmanship under normal use, service, and

maintenance FOR A PERIOD OF TWO YEARS FROM THE DATE OF

ORIGINAL PURCHASE from Liebert or the Liebert dealer or retailer.  THE

FOREGOING WARRANTY IS THE ONLY WARRANTY GIVEN AND NO

OTHER WARANTY IS PROVIDED, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.  Certain aspects of disclaimers are not applicable to

consumer products acquired by individuals and used for personal, family, or

household purposes (as distinguished from industrial or other purposes).  Local

laws may not allow limitations on how long an implied warranty lasts, so the

above limitation may not apply to you.  This warranty gives you specific legal

rights, and you may have other rights, which vary according to local law.

Certain repairs or services are the responsibility of the Purchaser and the

Purchaser is expected to pay for them.  This warranty does not extend either to

products with removed or altered serial numbers or to any losses or damages

due to act of God or source external to the product, misuse, accident, abuse,

neglect, negligence, unauthorized modification, alteration, or repair, use beyond

rated capacity, or improper installation, maintenance, application or use,

including, without limitation, use in a manner contrary to the accompanying

instructions or applicable codes.  WARNING: Warranty is void if the battery is

allowed to discharge below the minimum battery cutoff point.  To prevent such

discharge DO NOT leave the unit power switch "ON" for more than two (2) days 

without AC power being supplied to the UPS.  The battery must be recharged

every four (4) to six (6) months when not in use.

If the UPS fails to conform with the above warranty within the two year warranty 

period, Liebert will repair or replace the UPS, at Liebert's option.  Repairs or

replacements are warranted for the remainder of the original warranty period.

Purchaser, to make a warranty claim, should call 1-800-222-5877 to obtain a

Returned Goods Authorization number and shipping instructions.  Return

transportation costs to Liebert are the responsibility of the Purchaser.

"LIFE SUPPORT" POLICY

This product is not recommended, and the Company will not knowingly sell this

product, for use with life support and other designated "critical" devices.  ANY

SUCH USE BY A USER AUTOMATICALLY VOIDS AND DISCLAIMS ANY

AND ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY, IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, AND EXPRESS WARRANTIES THAT THIS

PRODUCT WILL CONFORM TO ANY AFFIRMATION OR PROMISE, FOR

THIS PRODUCT AND THE USER AGREES THAT IN NO EVENT SHALL THE 

COMPANY BE LIABLE FOR CONSEQUENTIAL OR INDIRECT DAMAGES.

DISCONTINUED 

PRODUCT

Summary of Contents for UPStation GXT1000MT-120





























Reviews: