background image

More user manuals on 

ManualsBase.com

3

Leakage Current 

ELECTROMAGNETIC COMPATIBILITY

—The Liebert

®

 GXT3

 complies with the limits for a 

Class A Digital Device, Pursuant to Part 15 of FCC rules. Operation is subject to the following 

conditions:

• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause 

undesired operation. Operating this device in a residential area is likely to cause harmful 

interference that users must correct at their own expense.

The Liebert GXT3 series complies with the requirements of EMC Directive 2004/108/EC and the 

published technical standards. Continued compliance requires installation in accordance with these 

instructions and use of accessories approved by Emerson.

NOTICE

Operating the Liebert GXT3 in residential areas may cause radio interference that the user 

must to correct at his own expense.

Information for the Protection of the Environment

UPS SERVICING

—This UPS makes use of components dangerous for the environment (electronic 

cards, electronic components). The components removed must be taken to specialized collection and 

disposal centers.

!

WARNING

Connect the ground (earth) safety conductor before connecting any other cables.

Summary of Contents for GXT3-10000T220

































Reviews: