6.0
KEY PAD FUNCTION:
1.
M1-M10
key: Memory key button
2.
Numerical (0-9)
key: For setting numeric data for sample number, sample weight
or limit number checking
3.
Decimal point (.)
key: For setting the decimal position of sample
4.
PCS/SET
key: For setting the counted sample numbers on the platter into scale
memory.
5.
QTY/SET
key: For alternation of changing normal counting and quantity check
operation.
6.
TARE/CHQ
key: For deducting the current tare and display net weight.
7.
ZERO/ MENU
key: For zero setting of the scale.
8.
M+
: Press this button to compute the total count data and the data can be
accumulated up to 99 counts
9.
MC
: For calling off the memorized data.
10.
TOTAL
: Press this button to toggle between normal counting function and memory
data recalling.
11.
WT/SET
: Press this button to key in the pre-determined unit weight into the
scale memory for normal operation.
12.
ENT key
: For cancelation of numeric setting data or reset the scale data.
7.0
: PRE-INSTALLATION CHECKS:
1.
Place the scale on a horizontally straight top. Check the bubble alignment to
ensure the bubble is at the centre position within the center circle. Otherwise,
adjust the scale support until the bubble is aligned. Refer to the below picture.
Correct
Incorrect
