Liberty Pumps D3600- Series Installation Manual Download Page 6

 

                            

©Copyright 2011 Liberty Pumps Inc.    All rights reserved                                                             6 

 

7000 Apple Tree Avenue  
Bergen, NY  14416      
Phone: (800) 543-2550     
Fax: (585) 494-1839 
www.libertypumps.com 

 

 

3 Year Limited Warranty 

Liberty Pumps, Inc. warrants that pumps of its manufacture are free from all factory defects in material and workmanship 
for a period of 3 years from the date of purchase.  The date of purchase shall be determined by a dated sales receipt 
noting the model and serial number of the pump.  The dated sales receipt must accompany the returned pump if the date 
of return is more than 3 years  from the "CODE" (date of manufacture) number noted on the pump nameplate. 

The manufacturer's obligation under this Warranty shall be limited to the repair or replacement of any parts found by the 
manufacturer to be defective,  provided the part or assembly is returned freight prepaid to the manufacturer or its 
authorized service center,  and provided that none of the following warranty-voiding characteristics are evident: 

The manufacturer shall not be liable under this Warranty if the product has not been properly installed;  if it has been 
disassembled, modified, abused or tampered with;  if the electrical cord has been cut, damaged or spliced;  if the pump 
discharge has been reduced in size;  if the pump has been used in water containing sand, lime, cement, gravel or other 
abrasives; if the pump has been used in water above the advertised temperature rating; if the product has been used to 
pump chemicals or hydrocarbons;  if a non-submersible motor has been subjected to excessive moisture; or if the label 
bearing the serial, model and code number has been removed. 

Liberty Pumps, Inc. shall not be liable for any loss, damage or expenses resulting from installation or use of its products, 
or for consequential damages, including costs of removal, reinstallation or transportation.   

There is no other express warranty.  All implied warranties, including those of merchantability and fitness for a 
particular purpose, are limited to three years from the date of purchase.   

This Warranty contains the exclusive remedy of the purchaser, and, where permitted, liability for consequential 
or incidental damages under any and all warranties are excluded. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 

 
 
 
 

Summary of Contents for D3600- Series







Reviews: