DL-SC41U-TX Installation Guide
5
Front and Rear Panels
Front Panel
1
2
3
4
1. POWER LED
- Illuminated red when power is applied
2. INPUT
- A/V source selector and input LEDs
• NOTE:
The RX HDMI can only be used when paired with the DL-SCU-RX HDBaseT receiver
3. OUTPUT
- Output selector and output LEDs
4. SWITCH
- A/V switch selector
•
To route an input to an output, select the
INPUT
, then the
OUTPUT
then press
SWITCH
. By
default the DL-SC41U-TX is set to auto switching mode.
5. DISPLAY
- Display control buttons, triggers CEC / RS232 commands
•
ON: Turns display ON
•
OFF: Turns display OFF
•
VOL-: Turns display volume down
•
VOL+: Turns display volume up
•
RELAY 1: Turns relay 1 state ON/OFF
•
RELAY 2: Turns relay 2 state ON/OFF
NOTE:
The RELAY 1/2 buttons can only be used when paired with the optional DL-SCU-RX
HDBaseT receiver (not included)