DL-SC41U-TX Installation Guide
10
Connect the included power supply to the DL-SC41U-TX power port, connect the IEC power cord connected to
power supply to a power source.
Applying Power
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category 6
connection between send and receive
units.
HDBaseT Cabling
To ensure proper performance of the
DL-SC41U-TX
, it is recommended that you use solid
core, shielded Category 6 F/UTP cabling at a minimum. Category 5e F/UTP may perform
well but may not support power over HDBaseT reliably over longer distances.
For optimized HDBaseT performance use the following Liberty Wire and Cable branded
cabling;
Category 6 plenum;
24-4P-P-L6SH
Category 6A plenum;
24-4P-P-L6ASH
Category 6 NON-plenum;
24-4P-L6SH
Category 6A NON -plenum;
24-4P-L6ASH
When using shielded category cabling
ALWAYS
...
....use shielded connectors
....properly ground the category cable
HDBaseT Cabling Requirements