DL-HDM44A-H2 Installation Guide
26
Description
Command
Examples
Set audio switching mode
[P]
to either follow video or to be
independent
SET AUDIOSW_M
[P]
[P] = [followvm]
[independent]
Command:
SET AUDIOSW_M independent<CR><LF>
Response:
AUDIOSW_M independent<CR><LF>
Query audio switching mode
GET AUDIOSW_M
Command:
GET AUDIOSW_M<CR><LF>
Response:
AUDIOSW_M independent<CR><LF>
Set audio input
[i]
to audio
output
[o]
route
SET AUDIOSW
[i]
[o]
[i] = [01-04]
[o] = [01-04, ALL]
Command:
SET AUDIOSW 01 02<CR><LF>
Response:
AUDIOSW hdmiin1 audioout2
<CR><LF>
Query audio route for output
[o]
GET AUDIOMP
[o]
[o] = [01-04, ALL]
Command:
GET AUDIOMP 02<CR><LF>
Response:
AUDIOMP hdmiin1 audioout2
<CR><LF>
Audio Routing Commands
NOTE
: By default the audio de-embedded outputs follow the video route. Below are commands you can use to
breakaway audio so it can be separated and routed independently from video.
