DL-HDM44A-H2 Installation Guide
14
Admin Settings
Adjusting EDID Settings
To adjust the admin settings for the DL-HDM44A-H2, click on
ADMIN SETTING
on the upper right hand corner
of the
Matrix Control
page.
You will be prompted for a password which is by default 123456. This can be changed in the admin settings page
if desired
EDID settings for inputs can be adjusted in the web GUI control interface. Click on the
ENTER
button in the
EDID
Setting
menu to access the settings
Note
: In the EDID Settings menu, the EDID settings for each HDMI input will not be able to be adjusted if the
EDID dip switches are set to a predefined EDID setting. In order to change the EDID settings for the inputs in the
web GUI control interface, all three EDID dipswitches on the back of the DL-HDM44A-H2 must be changed to
the UP position. If these switches are not in the UP position, change the dipswitches and do a power cycle for
the settings to take affect. For more into on the EDID Management settings via dipswitch see page 18