Carry Handle and Wire Stand Options
Note:
Your device may look slightly different from the device shown in the pictures. You will need a
Phillips screwdriver.
Option 1: Carry Handle plus Wire Stand
The device is shipped with the handle in the carrying position and the two-position wire stand attached.
Many customers prefer this option because it provides a carry handle and a stand that can be moved
with one hand.
The handle can also be used as a stand and moved to various positions. Moving the handle is described
in Option 3.
Option 2: Non-Adjustable Handle
If you prefer to “lock” the handle even more securely in the carry handle position, you can follow the
instructions below for installing the two (2) cup washers provided.
Remove the screw and washer
from both sides of the handle
Slide the cup washer over the screw, insert
in the handle, and tighten the screw
Cup washer
(open side)
Small washer
(Not essential)
Handle Stand
screw
Wire Stand
Handle
www.prentrom.com
Accent 800
2
