Libelium Waspmote Smart Parking v2 Technical Manual Download Page 116

Page: 116 / 155

Libelium Smart Parking Cloud Service

8.1.2. Service con

ﬁ

guration

The Smart Parking Cloud Service is compatible with the following LoRaWAN Network Servers: Loriot, Actility, The
Things Network

(TTN), The Things

ndustries (TT

) and the Embedded Network Server inside MultiTech basestations.

These are the URLs to be con

ﬁ

gured on the LoRaWAN Network Server:

Loriot

: https://api.libelium.com/cloud/parking/v2/services/loriot

Actility

: https://api.libelium.com/cloud/parking/v2/services/actility

TTN

: https://api.libelium.com/cloud/parking/v2/services/ttn

: https://api.libelium.com/cloud/parking/v2/services/tti

MultiTech

: https://api.libelium.com/cloud/parking/v2/services/multitech

Note:

Only one of these services can be active at the same time.

f you want to use Loriot as your LoRaWAN Network Server, you have to select it on the drop-down menu and

complete the required

ﬁ

elds. To

ﬁ

nd the information on the Loriot panel, you can follow the instructions described

on the

section.

Figure : Loriot con

ﬁ

guration

f you want to use Actility as your LoRaWAN Network Server, you have to select it on the drop-down menu and

complete the required

ﬁ

elds. To

ﬁ

nd the information on the Actility panel, you can follow the instructions described

on the

section.

- 115 -

v7.5

Summary of Contents for Waspmote Smart Parking v2




























































































































































Search results

Summary of Contents for Waspmote Smart Parking v2

Reviews:

Related manuals for Waspmote Smart Parking v2

Brands by name

Popular brands

Libelium Waspmote Smart Parking v2, Technical Manual

Search results

Summary of Contents for Waspmote Smart Parking v2

Reviews:

Related manuals for Waspmote Smart Parking v2

Brands by name

Popular brands