-6-
Figure : Moving the magnet away from the node.
The magnet is made of neodymium. It is a special, high-power magnet. We only advise to use the magnet Libelium provides.
It is not mandatory, but highly recommended to consider this feature when designing the project. The user should design the
software in a way the node can be reset if things go wrong. Remember that laboratory tests are always needed to validate the
feature before your final deployment.
When the node is already deployed in the field, and for instance it is installed in a traffic light, this feature can be used to reset
the node easily, as it is shown in the diagram below, where a technician uses a pole with the magnet attached in one side.
Figure : Applying the magnet in a real deployment
