-3-
1. Introduction
The aim of this manual is to introduce the user to Waspmote Plug & Sense! in a practical way.
This document applies to the following Waspmote Plug & Sense! models, approved for FCC and IC:
Model
FCC ID
IC
Waspmote Plug & Sense! 802.15.4
XKM-WPS-2400-V1
8472A-WPS2400V1
Waspmote Plug & Sense! 900 US
XKM-WPS-900-V1
8472A-WPS900V1
Waspmote Plug & Sense! WiFi
XKM-WPS-WIFI-V1
8472A-WPSWIFIV1
Waspmote Plug & Sense! 4G US
XKM-WPS-4G-V1
8472A-WPS4GV1
Waspmote Plug & Sense! LoRaWAN US
XKM-WPS-LORA-V1
8472A-WPSLORAV1
Waspmote Plug & Sense! Sigfox US
XKM-WPS-SFX-V1
8472A-WPSSFXV1
2. General and safety information
Software:
•
Upload code only using Waspmote IDE. If a different IDE is used, Waspmote can be damaged and can become
unresponsive. This use is not covered under warranty.
•
Do not unplug any connector while uploading code. Waspmote can become unresponsive. This use is not covered under
warranty.
•
Do not connect or disconnect any connector while Waspmote is ON. Waspmote can become unstable or unresponsive,
and internal parts can be damaged. This fact is not covered under warranty.
Hardware:
•
Do not handle black stickers seals on both sides of the enclosure (Warranty stickers). Their integrity is the proof that
Waspmote Plug & Sense! has not been opened. If they have been handled, damaged or broken, the warranty is void.
•
Do not open Waspmote Plug & Sense! in any case. This will automatically make the warranty void.
•
Do not handle the four metallic screws of Waspmote Plug & Sense!. They ensure waterproof seal.
•
Do not submerge Waspmote Plug & Sense! in liquids.
•
Do not place nodes on places or equipment where it could be exposed to shocks and/or big vibrations.
•
Do not expose Waspmote Plug & Sense! to temperatures below -10ºC or above 50ºC.
•
Do not try to extract, screw, break or move Waspmote Plug & Sense! connectors far from necessary usage, waterproof
sealing can be damaged and warranty will be voided. For more information:
http://www.libelium.com
•
Do not connect any sensor not provided by Libelium.
•
Do not place Waspmote Plug & Sense! where water can reach internal parts of sensors.
