ColorSave 1000ST-INJ user manual
13
3.3 Electrical Installation
3.3.1 Connections
See Fig. 8: Connections diagram.
a)
Connector J1-"Load cell" input, to the load cell (“Load cell” cable).
b)
Connector J2-"Alarm" output, to the alarm device (“Alarm” cable).
c)
Connector J3-"Sensor" input to the Injection machine (“Sensor” cable). For connection options
for this cable, see section
3.3.2 Sensor Cable Wiring Options
d)
Connector J4-Communication port to required device (optional).
e)
Connector J5-Motor control outlet to the motor cable (“Motor” cable).
f)
Connector 230V to the mains.
Note: Good grounding of the injection machine is required to ensure proper feeder operation.
Warning
Do not connect or disconnect the motor cable when the power is "on"
Fig. 8: Connections diagram