ColorSave 1000ST-INJ user manual
12
3.2.3 Venturi Loader Installation
Fig. 6: Venturi loader
a)
Connect the Venturi suction tube (19) to the feeder’s MB/AD loading inlet (17) with the flexible 25
mm dia. loading pipe (18).
Note: The maximum pipe length should not exceed 3 meters and the maximum difference
between the end of the Venturi suction tube and the top of the feeder-loading inlet should not
exceed 2.5 meters.
b)
Connect the pneumatic air inlet (20) of the Venturi tube to the air outlet of the Air valve (P1) on
the back panel of the controller.
c)
Connect a 6-8 AT air supply to the air inlet of the Air valve of the controller.
d)
Dip the Venturi suction tube into the main MB/AD container (21). Verify that the tube is straight
and not twisted or bent, as this may disturb the suction process.
3.2.4 Control Unit Mounting
Fix the control unit by its mounting arm in one of the following options:
Option A (bottom surface):
Option B (top surface):
Fig. 7: Control unit mounting