LI-COR LI-7200x, Instruction Manual

Page: 43 / 64

Section 5.
Connecting with an LI-8100A
The LI-8100A supports Ethernet communication, and therefore can be connected to
the satellite terminal. The steps below show how to set up communication for the
LI-8100A with or without the multiplexer.
This section assumes that you have completed all the required steps in Configuring
the communication system on page 3-1 and that you have verified that the satellite ter-
minal can connect with the Internet.
Configuring the LI-8100A
1
Configure the PC that is attached to the system so it has a static IP address.
This is typically accomplished by changing the network settings (see Configure PC
network communication on page 6-2).
2 Connect a PC to the LI-8100A using the RS-232 cable.
3 Launch the LI-8100A PC software and connect with the instrument.
5-1 Satellite Communication