LI-COR LI-6400, Manual

Page: 436 / 846

Configuration Basics
The Reset Menu
16-16 Using the LI-6400
16
A complete list of configuration commands is given below in Configuration
Command Summary .
When the Config Editor is exited using Cancel , no configuration changes are
made. When the Config Editor is exited using
OK
, the an exit screen
(Figure 16-14) will appear if editing changes have been made to the config
file. You can save the file, save the configuration as a new file, or abandon
the whole thing.
Pressing S or A will implement the configuration file; the only difference is
what name the configuration file will have. Pressing C will be the same as ex-
iting via Cancel.
The Reset Menu
ÒConfig File (Re-)InstallÓ
This program will set some or all of the default configuration files back to fac-
tory defaults. It can be used to undo changes you might have made to these
files, or to get the /User disk back into a usable form after it has been format-
ted, or install a default configuration onto an arbitrary disk (such as the hidden
disk after it has been brought on-line).
After the program opening message, you are asked to choose a destination.
Typically this would be User. The disk selected will then have a directory cre-
(S/A/C)
Config has changed
Figure 16-14. The exit options when leaving the Config Editor after changing
a configuration.
Save A s a new file
S ave Õ<file name>Õ
C ancel changes
ÒSysÓ
Choose a destination
ÒUserÓ