LGMG SR0818D, Maintenance Manual, Page: 9 / 54

Maintenance Manual of Rough Terrain
Mobile Elevating Work Platform
3
1.1 Compliance and
obedience
1) The operator is only allowed to perform
routine maintenance items as specified in
this manual.
2) Carry out periodic maintenance and check
by trained maintenance technicians as
required by the manufacturer.
Maintenance Symbols
The following symbols are used in this manual
to help convey relevant meanings in the
instructions. When one or more symbols are
shown at the first part of the maintenance
program, the meanings expressed are as
follows.
It indicates a tool required to carry out this
procedure.
It indicates a new part required to carry out this
procedure.
It indicates that the engine must be in a cooling
state before carrying out this procedure.
1.2 Check for safety manual
It is required to keep the operator in a good
state and the safety manual in proper condition
for safe operation.
The manual shall be stored
in a container in the working platform provided
by each machine. An unrecognized or lost
manual shall be unable to provide necessary
safety and operation information for safe
operation.
1) Confirm that the storage container is on site
and in a good condition.
2) Confirm both the responsibility manual and
safety manual are in the storage container
within the work platform by the operator.
3) Check each page of the manual to be
legible and in a good condition.
4) Put the manual into the file storage box
after use.
△
!
If the manual needs to be replaced,
please contact the service staff of
LGMG.
1.3 Check for labels and
signs
It is required to keep all safety and description
labels and signs in a good condition for safe
operation of the platform. Labels warn operators
and staff of many possible hazards in using the
platform. They also provide users with operation
and maintenance information. Illegible labels
cannot warn staff of steps or hazards and may
lead to unsafe operating conditions.
Refer to the label section in this operation
manual and use the label menu and instructions
to check that all labels are in place.
Check the clarity and damage of all the labels
and immediately replace any damaged or
illegible label.
△
! If the labels need to be replaced,
please contact the service staff of
LGMG.
1.4 Check for damaged,
loose or missing parts
This step is performed every 8 hours or every
day. whichever comes first.
Carrying out daily equipment status check is
necessary for ensuring safe equipment
operation and maintaining good equipment
performance. Incorrect positioning, repairing
damaged equipment, and loose or missing parts
may result in unsafe operating conditions.
1) Check for damaged parts for the whole
platform, and check for incorrect installation
or
missing parts and components,
including: