LGMG SR0818D, Maintenance Manual, Page: 23 / 54

Maintenance Manual of Rough Terrain
Mobile Elevating Work Platform
17
temperature engine oil. Danger of
scalding!
△
! When operating on the oil system,
pay attention to the surface cleaning.
Carefully clean all areas involved. Blow
wet parts with compressed air.
△
!
Please observe the safety
regulations for engine oil and relevant
local regulations. Dispose of spilled
engine oil and filter elements as
required. Waste oil cannot penetrate
into the ground.
△
!
Test run shall be carried out after
each operation. At the same time, pay
attention to the sealing and lubricating
oil pressure, and then check the
engine oil level.
Check the engine oil level every 8 hours or
every day
.
Insufficient or excessive engine oil may cause
damage to the engine. The engine oil level can
only be checked when the engine is placed
horizontally and closed. If the engine is hot,
close the engine and check the engine oil level
5 minutes later. Check it immediately if the
engine is cooled.
Kubota-D1105:
1. Oil fill plug 2. Oil measuring rod
Kubota-V2403:
1. Oil measuring rod 2. Oil fill plug
1) Insert the oil measuring rod and clean it
with a piece of clean and fiber-free cloth.
2) Insert the oil measuring rod into the bottom.
3) Pull out the oil measuring rod and read the
value of engine oil level.
4) The engine oil level shall always be
between MIN and MAX!
Fill up to the maximum liquid level if necessary.
1.18.2 Replacement of
Engine Oil and Filter
△
!
Do not operate on running
engines!
No smoking and open fires!
Be careful when contacting with high
temperature engine oil. Danger of
scalding!
△
!
When operating on the oil system,
pay attention to the surface cleaning.
Carefully clean all areas involved.
Blow wet parts with compressed air.
△
!
Please observe the safety
regulations for engine oil and relevant
local regulations. Dispose of spilled
engine oil and filter elements as
required. Waste oil cannot penetrate