22
OPERATION
EN
• This programme has a longer washing time than
the
Cotton Wash
programme.
• To reduce noise in spinning, this programme
uses a slow spin to prevent the clothes from
being damaged, so the laundry has more
moisture than normal.
Pre Wash+Cotton
Use this programme to pretreat immediate stain
without handwash.
• It is necessary for clothes which could smell bad
if they are not washed promptly.
Quick Wash
Use this programme to wash lightly soiled clothes
for a short time.
NOTE
• This programme's recommended amount of
laundry is under
5.5 kg
.
Eco Cotton
Use this programme to consume less water and
electricity to wash normally soiled cotton load.
Information for Energy Test
Select the water temperature to suit wash cycles.
Always follow clothes manufacturer's care label or
instructions when washing.
• For normally soiled items, select the programme
and options as below and test it in accordance
with
AS/NZS 2040. 1
.
- Programme:
Eco Cotton
- Option: press
Water Level
for 3 seconds,
Hot
Wash
and
Cold Wash
• The test results depend on water pressure,
water hardness, water supply temperature,
room temperature, type and amount of laundry,
type and amount of detergent, fluctuations in
the main electricity supply and chosen additional
options.
• During water supply, press the
START/PAUSE
button to pause, open the door and add the
detergent powder (drum type) that has been
diluted with warm water directly into the drum.
Press the
START/PAUSE
button to resume the
cycle.
• Since this cycle is programmed to use a lesser
amount of water, usage of fabric softener is not
recommended.
• At the end of hot wash fill, the washing operation
starts.
Tub Clean
This is a special function to clean inside the drum of
your appliance.
• To use this function, refer to the
MAINTENANCE
for details.
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
• The extra options and functions can be changed
when the
START/PAUSE
button is pressed
during operation depending on the selected
programmes, options and functions.
Soil Level
Use this option to select the wash strength.
• 2 levels are selected for
Heavy
and
Light
.
• If you do not select this option, it will be in the
normal state with the light turned off.
Temp.
Use this option to change water temperature.
• 3 levels are selected for
Warm
(
Hot
and
Cold
),
Hot
and
Cold
.
