background image

23

Washing Programme

Wash cycles are designed for the best wash 

performance for each type of load. Select the 

programme that best matches the load 

contents for maximum wash performance and 

fabric care. Turn the programme knob to select 

the desired programme. When you select a 

wash programme, the light for the 

corresponding wash programme will turn on.

Normal

Use this programme to wash normal loads. The 

built-in sensor detects the size of the load, 

calculating wash, rinse and, spin settings 

accordingly.

 

If water or wet laundry is already in the drum 

before starting, the water level will be 

increased.

 

For lightweight bulky loads, the water level 

may be too low and should be increased 

manually.

Stain Care

Use this programme to remove stains 

efficiently. Water will be heated up to about 40 

°C under this programme for the best washing 

result.

 

This programme uses more warm water than 

other programmes as it has higher set 

temperature for heating.

 

Stains that can be easily removed with this 

programme are coffee, soda, juice, soy sauce 

etc.

 

If only cold water is connected, it takes longer 

laundry time as heating time lengthens.

 

While heating, there might be water drops at 

the glass of the door due to humidity 

differences. Wipe it after laundry as this is 

normal phenomenon.

 

Be careful as the exterior of the machine is 

hot by heating.

 

This programme’s recommended amount of 

laundry is under

 6 kg

.

Allergy Care

This programme is specifically designed for 

reducing certain allergens at a powerful, high 

temperature.

 

Stains that can be easily removed with this 

programme are milk, blood, sebum, egg, etc.

 

If only cold water is connected, it takes longer 

laundry time as heating time lengthens.

NOTE

 

Due to higher water temperatures used, this 

programme is not recommended for wool, 

silk, leather, or any other delicates or 

temperature sensitive items.

 

While heating, water drops might be created 

at the door glass due to humidity differences. 

This is normal. Wipe the door glass after the 

wash cycle is completed.

 

Be careful as the exterior of the appliance is 

hot by heating.

 

This programme’s recommended amount of 

laundry is under

 4.5 kg

.

Smart Rinse

Use this programme to increase rinsing 

performance. This would include underwear 

and baby clothes. If someone has sensitive 

skin or skin trouble, use this programme.

Eco Wash

Use this programme to consume less water 

and electricity to wash normal clothes.

Quick Wash

Use this programme to wash lightly soiled 

clothes for a short time.

 

This programme’s recommended laundry 

amount is under

 4.5 kg

.

Pre Wash + Normal

Use this programme to pretreat immediate stain 

without handwash. It is necessary for clothes 

which could smell bad without prompt laundry.

EN

Summary of Contents for WT25BTS6H













































Reviews: