LG WT-80SNSM, Owner'S Manual

Page: 54 / 68

22
OPERATION
• Press the Spin button for 3 seconds to select and
press the POWER button to deselect.
NOTE
• Always keep the laundry amount to 2 kg or less
and make sure to redistribute the laundry
evenly.
• Select 60 minutes for cotton laundry and 120
minutes for synthetic fibre laundry for effective
moisture reduction.
Using Basic Options
Time Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Time Delay button to set the
required delay ending time.
4
Press the START/PAUSE button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press
Time Delay button
repeatedly until the reservation is cancelled or
press the POWER button to turn off and on
power.
Soak
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
• Press the
Wash button until u and l icons turn
on simultaneously.
Setting
Child Lock
Use Child Lock function to disable the controls.
This function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the POWER button.
• When the controls are locked,
CL
and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Beeper and Rinse buttons
simultaneously for 3 seconds to activate this
function.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Beeper and Rinse buttons
simultaneously for 3 seconds to deactivate this
function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
Beeper
Use this option to adjust the volume of the sound.
• 3 levels are selected for
High , Low and Mute .
global_main.book.book Page 22 Wednesday, November 11, 2020 11:26 AM