33
TROUBLESHOOTING
ENGLISH
Performance
Symptoms
Possible Cause & Solution
Poor stain removal
Proper options are not selected.
• Heavier soils and tougher stains may require extra cleaning power. Select
the
Soak
option to boost the cleaning power of the selected cycle.
Previously set stains.
• Items that have previously been washed may have stains that have been
set. These stains may be difficult to remove and may require hand washing
or pretreating to aid in stain removal.
Symptoms
Possible Cause & Solution
Staining
Bleach or softener dispensed too soon.
• Dispenser compartment is overfilled causing bleach or softener to
dispense immediately. ALWAYS measure bleach to prevent overfilling.
• Close the dispenser drawer gently.
Bleach or softener was added directly to the laundry in the drum.
• Always use the dispensers to ensure that laundry products are properly
dispensed at the right time in the cycle.
Clothes were not properly sorted.
• Always wash dark colours separately from light colours and whites to
prevent discolouration.
• Never wash heavily soiled items with lightly soiled items.
Wrinkling
Appliance is not unloaded promptly.
• Always remove items from the appliance as soon as the cycle is complete.
Appliance overloaded.
• The appliance can be fully loaded, but the drum should not be tightly
packed with items. The door of the appliance should be closed easily.
Hot and cold water supply hoses are reversed.
• Hot water rinse can set wrinkles in clothes. Check the supply hose
connections.
Musty or mildewy
odour in the appliance
Inside of drum was not cleaned properly.
• Run the
Tub Clean
function regularly.
global_main.book.book Page 33 Wednesday, November 11, 2020 11:26 AM
Summary of Contents for WT-80SNSM
Page 32: ...備註 hk_main book book Page 32 Wednesday December 2 2020 8 54 AM ...
Page 66: ...Memo global_main book book Page 34 Wednesday November 11 2020 11 26 AM ...
Page 67: ...Memo global_main book book Page 35 Wednesday November 11 2020 11 26 AM ...
Page 68: ...global_main book book Page 34 Wednesday November 11 2020 11 26 AM ...