37
SPECIFICATIONS
ENGLISH
Problem
Possible Causes
Solutions
Wrinkling
Did you remove the load immediately after it
y
finished?
Did you overload the tub?
y
Did you reverse the hot and cold water inlets?
y
Remove the load immediately after it finishes.
y
Do not overload the tub.
y
Hot water rinse can cause garments to
y
wrinkle. Check the inlet hose connections.
Power is not turned on
Is the power cord plugged in properly?
y
Has a house fuse blown, a circuit breaker
y
tripped, or a power outage occurred?
Make sure that the plug is secured in a
y
grounded 3-prong, 120 V (60 Hz) outlet.
Reset the circuit breaker or replace the fuse.
y
Do not increase the fuse capacity. If the
problem is a circuit overload, have it corrected
by a qualified electrician.
The door does not open
when the cycle pauses or
finishes
Is the temperature in the tub too high?
y
Is the water level in washer high?
y
The washing machine has a safety lock built
y
into the door to prevent burning. Leave the
door closed and wait until the door lock icon
disappears from the display.
Allow the washer to complete the
y
programmed cycle, or Press the SPIN button.
The wash cycle time is
longer than usual
Is the washing machine overloaded? Are other
y
options added to the wash cycle?
This is normal. The washing machine
y
automatically adjusts the cycle time for the
amount of laundry, water pressure, water
temperature, and other operating conditions.
It is musty or moldy in the
tub
Has the incorrect detergent been used?
y
Did you clean the tub periodically?
y
Use only HE (High-Efficiency) detergent
y
recommended for a front-loading washing
machine.
See page 30, clean the inside and outside of
y
the washing machine periodically.
SPECIFICATIONS
Model WM3070H*A
Description
Front-Loading Washer
Electrical requirements
120 VAC @ 60 Hz.
Max. water pressure
14.5 - 116 PSI (100 - 800 kPa)
Dimensions
68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 129.5 cm (D with door open)
27" (W) X 29
3
/
4
" (D) X 38
11
/
16
" (H), 51" (D with door open)
Net weight
192 lb (87kg)
Max. spin speed
1,200 RPM
Summary of Contents for WM3070H*A
Page 40: ...40 MEMO ...