23
(1)
S P I N T R O U B L E
Check on the spinning, is the frequency of the water
level 248 or more. The frequency can be checked by
pressing the Time Delay and Quick Cycle
buttons at the same time on the program.
Check the sensor
(Pressure) or hose
(Sensor). If the problem is
on the sensor or the hose,
replace the sensor or the
hose.
When pressing Stain Cycle, Soak and POWER
buttons at the same time after power off, press the
Start/Pause button 2 times, is the drum low speed
spin?
Normal
Is it disconnected, or disassembled?
[Black : 2pin( ), Yellow: 2pin( ), Red : 3pin( ),
Blue : 6pin( )]
Correct the connector
Is it disconnected, or disassembled?
[White : 3pin ( ), National : 4pin ( )]
Replace the MAIN PWB ASSEMBLY
Correct the connector
Check the motor connector, Is the resistance of the
terminal same as the figure?
MOTOR TERMINAL (1)
Resistance of terminal :
~
/ ~
/ ~
: About 5
Ω
~ 10
Ω
Replace the Stator
Assembly
(4417EA1002D)
