29
EN
Using Smart Diagnosis™
Smart Diagnosis™ Through the
Customer Information Centre
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information center when the appliance
malfunctions or fails. Use this function only to
contact the service representative, not during
normal operation.
1
Press the
Power
button to turn on the
appliance. Do not press any other buttons
or turn the programme selector knob.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close
to the Smart Diagnosis™ icon.
Max.
10 mm
3
Press and hold the
More Time
button for
three seconds, while holding the phone
mouthpiece to the icon and
Power
button.
4
Keep the phone in place until the tone
transmission has finished. Time remaining
for data transfer is displayed.
•
For best results, do not move the phone
while the tones are being transmitted.
•
If the call centre agent is not able to get
an accurate recording of the data, you
may be asked to try again.
5
Once the countdown is over and the tones
have stopped, resume your conversation
with the call centre agent, who will then be
able to assist you using the information
transmitted for analysis.
NOTE
•
The Smart Diagnosis™ function depends on
the local call quality.
•
The communication performance will improve
and you can receive better service if you use
the home phone.
•
If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
Summary of Contents for WF-DT90TW
Page 38: ...Memo ...
Page 76: ......
