background image

27

aintenance

M

The water circulation nozzle & steam nozzle

• Clean the water circulation nozzle, if clogged.

Cleaning your washer

1. Exterior

Proper care of your washer can extend its life.

The outside of the machine can be cleaned with warm water and a neutral non abrasive 

household detergent.

Immediately wipe off any spills. Wipe with damp cloth.

Try not to hit surface with sharp objects.

❋ 

IMPORTANT: Do not use methylated spirits, diluents or similar products.

2. Interior

Dry around the washer door opening, flexible gasket and door glass. 
Run washer through a complete cycle using hot water. 
Repeat process if necessary.

Winterizing instructions

If the washer is stored in an area where freezing may occur or moved in freezing
temperatures, follow these instructions to prevent damage to the washer:

1. 

Turn off  water supply tap.

2. 

Disconnect hoses from water supply and drain water from hoses.

3. 

Plug electrical cord into a properly grounded electrical outlet.

4. 

Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into an empty wash drum.
Close the door.

5. 

Set spin cycle and let washer spin for 1minute to drain out all water.

Not all of the RV antifreeze will be expelled.

6. 

Unplug electrical power cord, dry the drum interior, and close the door.

7. 

Remove dispenser drawer, drain and dry excessive water from the compartments.

8. 

Store washer in an up right position.

9. 

To remove antifreeze from washer after storage, run empty washer

through a complete cycle using detergent. Do not add wash load.

NOTE

Remove hard water deposits using only cleaners labeled as safe for washing
machine.

Summary of Contents for WD12490FD




































Reviews: