24
aintenance
M
The water inlet filter
- " " error message will blink on the control panel when water does not enter the
detergent drawer.
- If water is very hard or contains traces of lime deposit, the water inlet filter may
become clogged.
It is therefore a good idea to clean it from time to time.
❋
Before cleaning the washer interior, unplug the electrical power cord to avoid electrical
shock to avoid electrical shock hazards.
❋
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable
the door lock to prevent young children being trapped inside.
1
.
Turn off the water tap.
2
.
Unscrew the water inlet hose.
3.
Clean the filter using a hard bristle
brush.
4
.
Tighten up the inlet hose.
Summary of Contents for WD-12320RDK
Page 1: ...P No MFL38868782 ...
Page 2: ...WD 12320RDK WD 12325RDK ...
