22
MOP CLEANING (OPTION)
• To avoid odors, wash any foreign material or dust off the mop after cleaning is completed.
• To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is
contaminated with liquids such as coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not attempt
to clean the carpet while the mop plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture on the floor, it can interfere with the navigation and damage the unit.
• Smart Diagnosis feature is not available, when the Mop Plate is attached.
Tip
1. Attach the ultra microfiber mop to the
Velcro of the mop plate as shown in the
figure.
2. Firmly slide the Mop Plate into the
furrows until you hear a 'click' sound.
※
Note that, if the Mop Plate is not
secured correctly, it may separate
during the cleaning.
3. It is essential that the fixing hooks on the
Mop Plate align correctly on to the fixing
grooves on the underside of the cleaner.
For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following
instructions:
By attaching the ultra microfiber mop, you can
effectively use the Robot Cleaner to remove dust
on hard floor surfaces.
When the mop plate is attached, the Robot
Cleaner will not climb on to carpets or over
thresholds, in order to prevent transferring dirt
from the mop.
Fixing hook
Fixing groove
“Click!”
Caution
Do not cover the bottom
camera sensor by mop.
