55
[IEC 62929 Standard]
Setting for Cleaning Performance Test
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push ‘TURBO’ button on the Robot Cleaner or ‘Turbo’ button on the Remote Controller and Robot
Cleaner will be set Turbo Mode.
3. Push ‘Repeat’ button on the Remote Controller and Robot Cleaner will be set Repeat Mode.
4. Push ‘START/STOP’ button on the Robot Cleaner or ‘ ’ button on the Remote Controller and
Robot Cleaner will be operated.
1.
Put fully charged Robot Cleaner down on start point and turn on.
2. Push two button like picture for 3 seconds to access Test
Mode(Straight).
3. (1) In case of testing on Hard Floor : Display will be on and flashing.
(2) In case of testing on Carpet : Repeat, Operational Status, Mute
Icon will be on and flashing.
※
Change LED expression by pushing ‘Mode’ button on the
Remote Controller.
4. Push ‘START/STOP’ button on the Robot Cleaner or ‘ ’ button on
the Remote Controller and Robot Cleaner will be operated.
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push ‘Repeat’ button on the Remote Controller and Robot Cleaner will be set Repeat Mode.
3. Push ‘START/STOP’ button on the Robot Cleaner or ‘ ’ button on the Remote Controller and
Robot Cleaner will be operated.
※
Use this mode only when organizations test cleaning performance or driving performance according
to IEC62929
Dust Removal Test - Box(Hard Floor & Carpet)
Dust Removal Test - Straight Line(Hard Floor & Carpet)
Autonomous navigation/coverage test
[Hard Floor Test mode]
[Carpet Test mode]
