14
OVERVIEW
1.5
1.5
2
ﺮﺘﻣ
1.5
ﺮﺘﻣ
1.5
ﺮﺘﻣ
2
< Warning > When the Robot Cleaner is operated with the dust bin compartment lid left
open, it can cause an injury or serious damage to the product.
1
Install the home station. (p15)
Insert the power cord plug into an outlet and locate
the station against a wall. If power is not supplied to
the home station, the Robot Cleaner will not charge.
2
Turn on the power supply of the Robot
Cleaner. (p16)
Turn ON the power switch on the rear-left of
Robot Cleaner, and press the ‘START/STOP’
button on the top or press the ‘Power’ button
on the Remote controller.
※
If the power supply is not turned on, refer to
page 16.
3
Check the dust bin.
Check the cleanness of the dust bin before starting
cleaning and close the dust bin compartment cover
on the main unit.
4
Start cleaning. (p17)
Press the ‘START/STOP’ button (or ‘ ’ button on
the Remote Controller) once again while the Robot
Cleaner is turned on. You will hear an announcement
of the cleaning mode and cleaning will begin once
the Robot Cleaner has reversed and turned around.
5
6
Automatic charge. (p18)
Use the cleaning mode and auxiliary functions.
(p19~22)
T h e Ro b ot C l e a n e r w i l l s e l f- d i a g n os e a n d
automatically return to the home station to recharge
before the complete discharge of the battery. It takes
approximately three hours to charge the battery.
Use the buttons on Robot cleaner and Remote
Controller to use each cleaning mode and supporting
features
For Cleaning Mode, you can choose among ZigZag,
My Space, and Repeat; for secondary features,
Manual and Microfibre Mop.
