- 74 -
LGE Internal Use Only
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. Technical Brief
Table. Interface between 5M Camera Module and SUB Board
GND
GND
GND
24
Master clock input
Input
ISP_SENS_MCLK
23
Ground
Ground
GND
22
Digital Power (2.8V)
Power
CAM_DVDD_2.8V
21
Ground
Ground
GND
20
Analog Power (2.8V)
Power
CAM_AVDD_2.8V
19
Ground
Ground
GND
18
NC
NC
NC
17
Ground
Ground
GND
16
AF Motor power (2.8V)
Power
PM_CAM_AF_2.8V
15
I2C Data
Input/Output
I2C_SDA
14
I2C Clock
Input
I2C_SCL
13
NC
NC
NC
12
Camera reset (Active “L”)
Input
5MCAM_RESET_N
11
Ground
Ground
GND
10
NC
NC
NC
9
NC
NC
NC
8
Ground
Ground
GND
7
Data line +
Output
DATAP
6
Data line -
Output
DATAN
5
Ground
Ground
GND
4
Clock line +
Output
CLKP
3
Clock line -
Output
CLKN
2
Ground
Ground
GND
1
Description
TYPE
NAME
NO
The 5M Camera module is connected to Sub board with 24pin Board to Board connector
(GB042-24S-H10-E3000). Its interface is dedicated camera interface port in MSM7200A via ISP
MV9319. The camera port supply 24MHz master clock to ISP and then ISP supply 24MHz
master clock to camera module again and receive serial data from camera module. And ISP
supply converted 8bits data, 48MHz pixel clock(max.15fps@ full resolution), vertical sync signal,
horizontal sync signal, reset signal to MSM7200A again. The camera module is controlled by
I2C port from MSM7200A via ISP.