15
HOW TO START AND STOP CLEANING
After the Roboking is turned on, press the START/STOP button to
begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop cleaning.
※
When the ‘START/STOP’ button is pressed while the power supply
of the Roboking is turned off, the power will be turned on. Press the
‘START/STOP’ button one more time to start cleaning.
After the Roboking is turned on, press the START button on the re-
mote control. A melody will sound and cleaning will begin.
Press the STOP button during the cleaning cycle to stop cleaning.
※
The Roboking cannot be turned on from Stand By, by using the re-
mote control when the power of the Roboking is off. When the power
is off, press the ‘START/STOP’ button on the upper side of Robok-
ing to turn the power on and to allow the remote to be used.
※
When the START button on the main unit or remote control is pressed, Roboking will start cleaning in
‘Spatial expansion’ mode.
※
During cleaning, collisions can happen when the sensor cannot detect objects because of their shape.
When this happens, the internal impact detecting sensor will activate and engage a backward motion.
※
If the Roboking is set to start cleaning at a location away from the home station, put the device on a flat
floor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a
location where there are no obstacles such as curtains or walls within 30 cm (11.8 in) of the Roboking.
Using the buttons on the Roboking
Using the remote control
For best results:
• Briefly scan the area to be cleaned for big and small objects that may cause difficulty for the
Roboking.
• If cleaning is started when the Roboking is at the home station, the device can rapidly be re
-
turned to the home station as the current home position has been accurately read.
Tip
