background image

Disposal of your old appliance
1.  When this crossed-out wheeled bin symbol is attached to a product it means the 

product is covered by the European Directive 2002/96/EC.

2.  All electrical and electronic products should be disposed of separately from the 

municipal waste stream via designated collection facilities appointed by the government 

or the local authorities.

3.  The correct disposal of your old appliance will help prevent potential negative 

consequences for the environment and human health.

4.  For more detailed information about disposal of your old appliance, please contact your 

city office, waste disposal service or the shop where you purchased the product. 

Disposal of waste batteries/accumulators
1.   When this crossed-out wheeled bin symbol is attached to batteries/accumulators of 

Your product it means they are covered by European Directive 2006/66/CE. 

2.  This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd) 

or lead(Pb) if the battery Contains more that 0.0005% of mercury, 0.002% of 

cadmium or 0.004% of lead. 

3.  All batteries/accumulators should be disposed separately from the municipal waste 

stream via designated collection facilities appointed by the government or the local 

authorities. 

4.  The correct disposal of Your old batteries/accumulators will help to prevent potential 

negative consequences for the environment, animal and human health. 

5.  For more detailed information about disposal of Your old batteries/accumulators, please 

contact Your city office, waste disposal service or the shop where You purchased the 

product. 

Summary of Contents for VH9200DSW





















Reviews: