For best performance always empty the dust bin
when the dust is full.
When the alarm sounds, check the dust bin.
If the dust bin is full, empty the dust bin.
Note :
When replacing the dust bin in the vacuum
you need to push and snap it. Make sure
that dust bin is fully engaged otherwise
suction power could be low.
-1
2
-
DUST BIN CLEANING
Dust bin release button
WARNING
Electrical shock and personal injury
hazard.
Always unplug power cord from
electrical outlet before performing
any service on vacuum.
TO CLEAN DUST BIN remove catch on dust bin
cyclone and separate the inner shield from the
dust bin cover as shown.
Inner shield
Catch
Dust bin
cover
Do not use wet dust bin and inner shield.
When reuse, dry completely.
Dust bin cover
Dust bin
cover button
Clean dust bin cover with a cloth and brush to
remove fluff or debris. And DO NOT USE ANY
LIQUID AND WATER.
TO REMOVE DUST BIN, push the dust bin
release button and pull the bin out of cleaner.
TO EMPTY DUST BIN, push the dust bin cover
button as shown, separate the dust bin cover
from the dust bin and remove dust.
UN
LO
CK
LOC
K
