ENGLISH
35
RS232 DC Power Outlet
(Depending on model)
• It is a mode to decide whether to output DC or not for power supply to IB Box in Installation Menu. We offer a output terminal in one Pin of RS232C
Jack for the use of communication.
• 5 V DC Power Outlet and 12 V DC Power Outlet must operate mutually exclusively. That is, only one of the two sides must be turned on.
-
You can select
Off
, ‘5 V’ or ‘12 V’.
»
When select ‘5 V’ the 5 V is forwarded through the port. when select ‘12 V’ the 12 V is forwarded through the port.
RS-232C IN
(CONTROL & SERVICE)
Interface box
»
Type of Connector: D-Sub 9-Pin Male
Male connector on box, viewed towards connector.
No.
Signal
Signal requirements
1
VCC
2
RX RS232
Standard RS232 specification
3
TX RS232
Standard RS232 specification
4
IR from TV
5
GND
Power ground
6, 8
Not connected
7
2 A
+5 V DC 10 %, max 100 mV ripple
9
1.5 A
+12 V DC 10 %, max 100 mV ripple
