ENGLISH
66
Group Manager 2.0
(Depending on model)
This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and
playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile
device.
Master
• Add, edit, and delete group.
• Clone your device’s settings data.
• Distribute
Schedule
and
Playlists
on a group basis.
• All monitor sets initially come in Master mode.
Slave
• Play
Schedule
and
Playlists
distributed in Master mode.
• Remove monitor sets for their groups.
• Monitor sets that have been added to a group are automatically switched to Slave mode. Conversely, when a monitor set has been deleted from a
group, it is automatically initialized and switched to Master mode.
• If a new Slave has been added to an existing group, or if the
Data Cloning
or the distribution of
schedule
/
Playlist
has not been properly performed,
the
Data Cloning
or
Sync
button will be activated.
• You can duplicate the master device’s setting data to the group by using
Data Cloning
.
• You can re-download the content distributed to the group by using
Sync
.
GROUP MANAGEMENT
• Creating a New Group
1. Click
Add New Group
.
2. Enter a group name.
3. Select the devices you wish to add to the group, and add them.
4. Click
Done
, and you will see that a new group has been created.
• Editing a Group
1. Click the group you wish to edit.
2. Add a new device by using
Add Device
.
3. Delete a device by using
Delete Device
.
4. Check whether the devices in the group are connected to a network by using
Device Check
.
5. If there are any sets of devices in the group that are not
Data Cloning
or content synchronized,
Data Cloning
or
Sync
button will be activated.
6. You can re-copy the master device’s setting data to the group by using
Data Cloning
.
7. You can re-distribute the content distributed to the group by using
Sync
.
• Deleting a Group
1. Click
Delete Group
.
2. Select the group you wish to delete and click
Delete
.
3. Check that the group you selected has been deleted.
• All Devices View: This page enables you to manage all slave monitor sets that are connected to the same network.
1. Click
All Devices View
.
2. Click
Reset Device
.
3. Select the slave monitor set whose device mode you wish to change and click
Reset
.
