24
OPTIONAL OPERATION
ENGLISH
Installer Setting - Setting Address of Central Control
It's the function to use for connecting central control.
Please refer to central controller manual for the details
Set Group No. by pressing
button.(0~F)
3
Move to Indoor No. setting option
by pressing button.
4
Set Indoor No. by pressing
button.
5
Press button to save.
6
Pressing button will exit settings mode.
❈
After setup, it automatically gets out of setup
mode if there is no button input for 25
seconds.
❈
When exiting without pressing set button, the
manipulated value is not reflected.
7
If entering into address setup mode by using
button, it indicates as picture below.
2
If pressing button long for 3
seconds, it enters into remote controller
setter setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
1
Function Code
Group No
Indoor No.
1,MFL67939930,영영 2018. 3. 16. 영영 2:25 Page 24
Summary of Contents for UM30R.N10
Page 41: ......
