manualshive.com logo in svg

LG UltraFine 65EP5G, Owner'S Manual

Share
Download
LG UltraFine 65EP5G Owner'S Manual Download Page 52

52

ENGLISH

[VPID]

Check the status of SDI signals sent by FPGA.

• 

[Off]: Does not show SDI signal status.

• 

[On]: SDI signal status is shown for three seconds and disappears.

 NOTE

 

•

Displayed Information

 

-

Transport

 

-

Picture

 

-

Transfer

 

-

Picture Rate

 

-

Aspect Ratio

 

-

Colorimetry (Output value type: Rec. 709 / Rec. 2020 / Rec. 2100)

 

-

Sampling

 

-

Bit Depth

 

-

VPID

• 

Supported Input Signal: SDI, SFP+

• 

Some VPID information may not be displayed, depending on the signal.

[Information]

Check the device information.

[Control]

• 

[Front LED]: Turns on or off all Control Box LEDs.

• 

[Auto Front Key Lock]: When this feature is set to ON, Front keys will be locked when there is no Front key input for 

30 seconds.

 

-

Locks all keys except the Power key.

 

-

Press and hold the Menu key for five seconds to unlock the keys. If this feature is set to OFF, locking does not work,

• 

even when there is no Front key input.

• 

[Auto IR Lock]: When this feature is set to ON, the remote control goes into locked mode if there is no remote control 

input for three minutes. Unlock the remote control by pressing the numbers 1, 2, 3, and 4 on the remote control in 

order. When this feature is set to OFF, locking does not work, even if there is no remote control input.

Summary of Contents for UltraFine 65EP5G







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands