35
ENGLISH
[Scan]
Select a scan mode for image output.
•
[Zero Scan]: Displays 100 % of the original image size.
•
[Over Scan]: Displays 95 % of the original image size.
•
[Under Scan]: Displays 105 % of the original image size.
•
[Pixel to Pixel]: Displays the actual screen size by a ratio of 1:1. (original screen size)
-
If the input image is smaller than the output resolution: The image should be displayed at the centre of the screen.
-
If the input image is the same size as the output resolution: The image should be displayed in full screen without
any cutouts or remaining areas.
-
If the input image is larger than the output resolution: With its centre fixed, the image is trimmed at the edges to
match the size of the output resolution.
NOTE
•
[Scan] is deactivated when any of the features below have been enabled.
-
[HDR/SDR Monitoring]
-
[Internal Pattern]
-
[PBP]
When deactivated, [Scan] is set to [Zero Scan].
[Scan] returns to the setting previously set by the user upon reactivation.
•
When [Scan] is set to [Pixel to Pixel], the items below are disabled.
-
[Aspect Ratio]
-
[AFD]
-
[Noise Reduction]
-
[MPEG Noise Reduction]
-
[Real Cinema]
-
[Smooth Gradation]
•
[Scan] may work differently depending on the [Screen Shift] settings.
•
When using [PIP], this feature applies only to the main screen.
