LG U300 Service Manual Download Page 125

Page: 125 / 184

5.2.2 Choosing image files

•

Select the image folder, where all the image files are located, by clicking on the Browse.... (The folder

name shall be different from that of the folder name in the snapshot. The folder name indicates the

path where the image files are located.)

•

Select the path, where AMSS Modem image file is located by clicking on the Browse... button. The

selected AMSS image will be downloaded to the handset from the path directory in the PC. Make

sure that you have chosen correct file. In case of wrong AMSS Modem file is selected, he phone may

not work. (The file name shall be different from that of the file name in the snapshot.)

5. DOWNLOAD

- 126 -

Z3X-BOX.COM

Summary of Contents for U300

























































































































































































Search results

Summary of Contents for U300

Reviews:

Related manuals for U300

Brands by name

Popular brands

LG U300, Service Manual

Search results

Summary of Contents for U300

Reviews:

Related manuals for U300

Brands by name

Popular brands