LG TS1301DPS, Service Manual

Page: 42 / 56

ERROR
ERROR DECISION
BASIS
CAUSE FOR ERROR
OCCURRENCE
REMEDY
THERMISTOR
AC, MOTOR
(CLUTCH
MOTOR)
· Thermistor has a bad
connection or failed
· AC motor has a bad
connection or failed
· Clutching is failed
-. Coupling get out of
gear.
-.Coupling is broken.
· Check the connections at the
Thermistor and at the WHITE
3-pin connector at the main
board
· Test thermistor to determine
it is not detective
· Check the connections at the
AC motor and at the WHITE
6-pin connector at the main
board
· Test AC motor or coupling to
determine it is not detective
· Reseat the connector.
· Replace the thermistor if
necessary.
·Reseat the connector.
· Replace the AC motor if
necessary.
· Replace the coupling or Clutch
housing if necessary.
Coin
Occurs when motor
locked
When foreign object such as
coin, pin, or clip entered the
washing plate
Remove the coin or foreign
object stuck between the
washer vane with pliers,
etc.
Stuc
·
is
·
·
THERMISTOR
Thermistor has a bad
connection or failed
Check the connections at the
Thermistor and at the WHITE
3-pin connector at the main
board
Test thermistor to determine it is
not detective
Reseat the connecto r.
Replace the thermistor if
necessar.
·
·
·
·
·
42
Tub
Clean
Automatic detection of
time to clean Tub
After Power On button
pressing, if is blinking in
the display, it is the time for
Tub Cleaning.
Tub Clean time is detected
automatically as per the
usages of washer (Generally
once after 30 usages)
·
·
Please empty the tub, insert
bleach into the detergent
dispenser and select the Tub
Clean cycle.
If you want to skip the Tub
Clean, press option buttons
to select desired cycle.
Once performed Tub Clean
cycle, will disappear
until next point of time to
clean the tub. ·
·
·