LG T2109VS2M, Owner'S Manual

Page: 38 / 44

38
EN
Error Messages
Symptoms Reason Solution
The door is not closed properly.
•
•
Close the door completely. If the
error code is not released, call for
service.
Door lock switch error.
• Check nothing is caught under the
door, including shipping materials or
lothing.
• Close the door completely. If the
error code is not released, call for
service.
Special Drain Feature.
• If the washing machine is paused
during a cycle for a few minutes, the
cycle will be cancelled and any water
remaining in the drum will be
drained.
Water supply taps are not fully
open.
• Fully open tap.
Water line hoses are kinked,
pinched, or crushed.
• Straighten the hose(s).
Water inlet filters are clogged.
•
Clean the inlet filters.
Water supply pressure to tap or
house is too low.
• Contact a plumber to have the water
lines repaired.
Water supply connected with
leaklimiting hoses.
• Do not use leak limiting hoses.
Foreign objects, such as coins,
pins, clips, etc., caught between the
wash plate and the inner basket.
• Turn off the washing machine and
then press the Power button. Press
the Spin button without selecting a
cycle to drain and spin the load.
When the spin is complete, remove
the clothes and then find and
remove any objects caught in the
wash plate.
Drain hose is kinked, pinched, or
clogged.
• Straighten the hose(s).
Drain discharge is more than 1.2 m
above bottom of washing machine.
• Adjust or repair drain. Maximum
drain height is 1.2 m.
After a dE error, some models will
begin the cycle automatically as
soon as the door is properly closed.
Otherwise, close the lid (door) and
press the Start/Pause button to
start the cycle.