background image

35

EN

Symptoms

Reason

Solution

Staining

Bleach or softener dispensed 

too soon.

 

Dispenser compartment is overfilled

causing bleach or softener to dispense

immediately. ALWAYS measure bleach to

prevent overfilling.

 

Close the dispenser drawer slowly.

Bleach or softener was added 

directly to the wash load in 

the drum.

 

Always use the dispensers to ensure that

laundry products are properly dispensed

at the right time in the cycle.

Clothes were not properly 

sorted.

 

Always wash dark colours separately

from light colours and whites to prevent

discoloration.

 

Never wash heavily soiled items with

lightly soiled items.

Water leaking

Supply hose connection is 

loose at tap or washing 

machine.

 

Check hoses for leaks, cracks and splits.

 

Tighten hose connections.

House drain pipes are 

clogged.

 

The washing machine pumps out water

very rapidly. Check for water backing up

out of the drain pipe during drain. If water

is seen coming out of the drain, check for

proper drain hose installation and check

for restrictions in the drain. Contact a

plumber to repair drain pipe.

Drain hose has come out of 

drain or is not inserted far 

enough.

 

Tie drain hose to supply hose or

standpipe to prevent it from coming out

during drain. For smaller drain pipes,

insert the drain hose into the pipe as far

as the drain hose flange. For larger drain

pipes, insert the drain hose into the pipe

2.5 - 5 cm past the flange.

A large item such as a pillow 

or blanket is above the top of 

the drum.

 

Stop the washing machine and check the

load. Make sure the load does not crest

above the top edge of the drum.

Summary of Contents for T2109VS2M













































Reviews: